The R-525-IK installation kit, which is compatible with the Synergy Series SCR-1, is simplified and consistent with common industry models. Installation kits are a great idea during new construction of homes and businesses because they simplify the actual installation of the loudspeakers.

The W-525-IK installation kit, which is compatible with the Synergy Series SCR-1, is simplified and consistent with common industry models. Installation kits are a great idea during new construction of homes and businesses because they simplify the actual installation of the loudspeakers.

The Synergy Custom Series SCR-1 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCR-1 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Synergy Series SCR-2 in-ceiling speaker provides great Klipsch sound, easy installation and outstanding reliability, making it one of the best values available in architectural audio.

The SCR-2 is a two-way speaker that employs a 6.5-inch IMG woofer and a 1-inch aluminum dome Tractrix® Horn tweeter. The 360-degree rotating horn lets you point the sound at the listening area just like a traditional enclosure loudspeaker. A -3dB tweeter attenuation switch gives you better sound control and is conveniently located just behind the grille.

While it looks very different, the SCR-2's drivers sonically match all Synergy Series models, delivering the same wide dynamic, low distortion performance.

The Synergy Custom Series SCR-3 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCR-3 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Il diffusore singolo CS-650-RSM serie Contractor, dotato di un woofer a doppia bobina mobile e due tweeter da 1,3 cm, accetta entrambi i segnali stereo destro e sinistro per i casi in cui lo spazio basta appena per un diffusore. Sfruttando i più recenti progressi della tecnologia dei materiali, il CS-650-RSM impiega coni in polimero per assicurare prestazioni migliori e surround in gomma per ulteriore affidabilità. I magneti più grandi aumentano l'efficienza e la sensibilità, le griglie in alluminio sinterizzato sono inattaccabili dalla ruggine.

The Reference Series RCR-3 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCR-3 is still owned and listened to in homes all around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Il modello a due vie CS-650-R serie Contractor permette di creare, a un prezzo accessibile, un ambiente acustico dinamico nella propria abitazione o per scopi commerciali. Sfruttando i più recenti progressi della tecnologia dei materiali, il CS-650-R impiega coni in polimero per assicurare prestazioni migliori e surround in gomma per ulteriore affidabilità. I magneti più grandi aumentano l'efficienza e la sensibilità, le griglie in alluminio sinterizzato sono inattaccabili dalla ruggine.

The Reference Series RCR-5 in-ceiling loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCR-5 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Offering incredible audio performance at an extremely competitive price point, the installer-friendly Klipsch R-3650-C in-ceiling loudspeaker brings high-quality entertainment into your home without taking up valuable floor space.

Featuring a 6.5-inch copper-colored IMG woofer, 1-inch aluminum tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as a treble contour switch, this dynamic in-ceiling speaker delivers all the gusto you'd expect from Klipsch. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-3650-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-3650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

The R-3800-C in-ceiling loudspeaker delivers superior audio performance while effortlessly integrating into almost any lifestyle. It was designed to deliver all the gusto you'd expect from Klipsch without taking up valuable floor space.

Featuring an 8-inch copper-colored IMG woofer, a 1-inch aluminum tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as a treble contour switch, this affordable and high-performance in-ceiling speaker gives you plenty of bang for your buck. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-3800-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-3800-C can be paired with the Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Creating a new benchmark in architectural audio excellence, the Klipsch R-5650-C in-ceiling loudspeaker brings powerful and detailed sound into your home without taking up valuable floor space. Whether it's used for home theater or stereo music applications, this model won't disappoint.

Featuring a 6.5-inch Cerametallic™ woofer cone, 1-inch titanium tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as treble and bass contour switches, the R-5650-C delivers unbeatable precision, clarity and efficiency. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-5650-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-5650-C can be paired with the Klipsch IK-650-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Discrete but not understated, the Klipsch R-5800-C in-ceiling loudspeaker significantly enhances the audio performance inside your home without cluttering it. Perfect for home theater or stereo music applications, this dynamic and installer-friendly model integrates nicely into almost any lifestyle.

Featuring an 8-inch Cerametallic™ woofer cone, a 1-inch titanium tweeter mated to a swiveling 100-degree asymetrical Tractrix® Horn, as well as treble and bass contour switches, the R-5800-C establishes a new benchmark in architectural audio excellence. In fact, because the swiveling horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

By incorporating a proprietary two-screw frame design, the R-5800-C is also one of the most easy-to-install products on the market. With this "one trip up the ladder" concept, installers only have to tighten two screws in order to securely mount the loudspeaker into the ceiling.

Available in a white finish, the R-5800-C can be paired with the Klipsch IK-800-C installation kit (sold separately).This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

Basato sulla stessa tecnologia e in grado di offrire le stesse prestazioni dei modelli Klipsch di forma circolare da soffitto, l'R-5650-C2 presenta un woofer con cono in Cerametallic™ da 16,5 cm leggero e caratterizzato da un ottimo smorzamento e un tweeter in titanio da 2,5 cm adattato a una tromba Tractrix® a 100 gradi girevole nonché comandi delle alte frequenze e dei bassi per garantire un suono raffinato e dalla risposta in frequenza regolare.

Poiché la tromba girevole consente all'installatore di far diffondere il suono nella direzione desiderata, il rapporto tra energia diretta e riflessa è alto nell'area di ascolto, creando un ambiente sonoro di grandi dimensioni con immagine audio ben definita.

Disponibile con una finitura bianca, l'R-5650-C2 è verniciabile e può essere accoppiato con il kit di installazione Klipsch IK-650-C2 (venduto separatamente) che incorpora un anello paraspruzzi, una fascetta per mantenere separati i cavi e staffe codificate a colori per identificare facilmente le dimensioni del diffusore, nonché alette metalliche perforate agevolmente fissabili a montanti mediante viti, graffette o chiodi; verniciate in bianco per essere facilmente contrassegnabili e collocabili, possono essere ripiegate intorno ai bordi dei montanti se necessario.

Aggiungendo questo modello di forma quadrata e a montaggio a filo alla sua serie di prodotti architettonici di alta classe e facile installazione, Klipsch permette ora di trovare il diffusore adatto per ogni tipo di applicazione e arredamento.

Il modello R-2650-C2, di forma quadrata e dal design moderno, si aggiunge alla vasta linea di prodotti architettonici Klipsch offrendo agli installatori una scelta ancora più grande di diffusori dalle prestazioni elevate montabili a filo. Perfetta per la diffusione di musica stereo e per l’home theater, questa soluzione per l’audio discreto assicura un suono potente e ricco di dettagli.

Dotato degli stessi componenti di pilotaggio del corrispondente modello di forma circolare, l’R-2650-C2 a due vie impiega un woofer con cono in polimero grigio da 16,5 cm e un tweeter con morbida cupola in seta da 2,5 cm per offrire profondità e chiarezza del suono superiori.

Disponibile con una finitura bianca, l’R-2650-C2 è verniciabile e può essere accoppiato con il kit di installazione Klipsch IK-650-C2 (venduto separatamente) che incorpora un anello paraspruzzi, una fascetta per mantenere separati i cavi e staffe codificate a colori per identificare facilmente le dimensioni del diffusore, nonché alette metalliche perforate agevolmente fissabili a montanti mediante viti, graffette o chiodi; verniciate in bianco per essere facilmente contrassegnabili e collocabili, possono essere ripiegate intorno ai bordi dei montanti se necessario.

Aggiungendo l’R-2650-C2, un modello dal prezzo accessibile, alla sua serie di prodotti architettonici di alta classe e facile installazione, Klipsch permette ora di trovare il diffusore adatto per ogni tipo di applicazione e arredamento.

The R-800-IK installation kit, which is compatible with the Reference Series RCW-5 and the Synergy Series SCW-3, is simplified and consistent with common industry models. Installation kits are a great idea during new construction of homes and businesses because they simplify the actual installation of the loudspeakers.

The W-650-IK installation kit, which is compatible with the Reference Series RCW-3 and the Synergy Series SCW-2, is simplified and consistent with common industry models. Installation kits are a great idea during new construction of homes and businesses because they simplify the actual installation of the loudspeakers

The Synergy Series SCW-2 in-wall speaker provides great sound, easy installation and outstanding reliability, making it one of the best values available in architectural audio.

The SCW-2 is a two-way speaker that employs a 6.5-inch IMG woofer and a 1-inch aluminum dome Tractrix® Horn tweeter. The proprietary pivoting square horn delivers wide dynamics, low distortion and the highest levels of power and output available whether part of a home theater or distributed sound system.

The SCW-2's -3dB tweeter attenuation switch gives you better sound control, but is neatly concealed just behind the form-fitting grille, which may be painted.

The Synergy Custom Series SCW-1 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCW-1 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Synergy Custom Series SCW-3 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the SCW-3 is still owned and listened to by Klipsch fans around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Reference Series RCW-5 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCW-5 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

The Reference Series RCW-3 in-wall loudspeaker was first introduced in 2000 and manufactured by Klipsch until 2004. While no longer in production, the RCW-3 is still owned and listened to in homes around the world. To connect with other people who are passionate about audio and interested in Klipsch Classic products, visit one of the several Klipsch Classic areas on our open forum bulletin board.

Il modello a due vie CS-650-W serie Contractor permette di creare, a un prezzo accessibile, un ambiente acustico dinamico nella propria abitazione o per scopi commerciali. Sfruttando i più recenti progressi della tecnologia dei materiali, il CS-650-W impiega coni in polimero per assicurare prestazioni migliori e surround in gomma per ulteriore affidabilità. I magneti più grandi aumentano l'efficienza e la sensibilità, le griglie in alluminio sinterizzato sono inattaccabili dalla ruggine.