Most distributed audio systems are plagued with thin-sounding performances, but the new IC-SW-8T2 in-ceiling subwoofer changes everything. Engineered for music reinforcement applications, these unobtrusive, easy-to-install loudspeakers feature a transformer-less design for 70V/100V distributed-line systems with two wattage settings. Since transformers severely limit a subwoofer's capabilities, this unique design is the perfect solution when building a great sounding commercial system.

The IC-SW-8T2 adds more dimension to any in-ceiling configuration by using an 8-inch woofer, 8-inch drone, polypropylene cones and high-temperature voice coils in the active driver. While most subwoofers use a port to increase output, the IC-SW-8T2 employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and removes turbulence that is often present in ported designs. Maximum continuous output is a remarkable 111dB. And since AES rated sensitivity is 92dB, adequate levels can be achieved with modest amplifier power using the IC-SW-8T2.

Other key features of the IC-SW-8T2 include the ability to easily switch from low impedance to high impedance distributed-line applications as well as mono and two-channel inputs in low impedance modes. This durable subwoofer has an ABS plastic baffle, formed steel back can and a four-point terminal strip input connector and is UL 2043 and 1480 certified. The IC-SW-8T2 is shipped complete with a tile bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 061347) is also available for drywall ceiling installations.

The IC-525-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-certified (2043 and 1480) in-ceiling speaker with an integrated back can and multi-tap transformer.

A two-way design, the speaker features a 5.75-inch woofer and 1-inch titanium diaphragm compression driver mated to a round Tractrix® Horn with XT technology for smooth response with constant directivity. The 1-inch Tractrix port provides deeper, fuller bass with less compression and distortion.

For distributed line applications, the IC-525-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located on the front baffle. 

The speaker's included tile bridge allows for easy installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 1010413) can be purchased separately to further simplify drywall installations.

The IC-400-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-certified (2043 and 1480), value-priced in-ceiling speaker with an integrated back can and multi-tap transformer. 

A two-way design, the speaker features a 5-inch woofer and 1-inch titanium diaphragm compression driver mated to a round Tractrix® Horn for smooth response with constant directivity. The 1-inch Tractrix port provides deeper, fuller bass with less compression and distortion.

For distributed line applications, the IC-400-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap setting is conveniently located on the front baffle. 

The speaker's included tile bridge allows for easy installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 1010413) can be purchased separately to further simplify drywall installations.

This optional mud ring kit offers increased mounting flexibility for our IC-650-T 70-volt in-ceiling speaker when used in drywall applications. These pre-construction brackets are made of durable, powder-coated 20 guage steel, making them suitable for plenum spaces. They attach to the ceiling joists prior to Sheetrock® installation and simplify speaker placement.  

The IC-650-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-certified (2043 and 1480) in-ceiling speaker with an integrated back can and multi-tap transformer. 

A  two-way design, the speaker features a 6.5-inch woofer and 1-inch titanium diaphragm compression driver mated to a round Tractrix® Horn with XT technology for smooth response with constant directivity. The 1-inch Tractrix port provides deeper, fuller bass with less compression and distortion. 

For distributed line applications, the IC-650-T features a 70/100 volt multi-tap transformer. A single rotary switch for the 4-ohm bypass and multi-tap setting is conveniently located on the front baffle. 

The speaker's included tile bridge allows for easy installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required. A mudring kit (part # 1010414) can be purchased separately to further simplify drywall installations.

The IC-8T-SW Mud Ring kit is designed to make the installation of our commercial ICSW-8T2 in-ceiling subwoofer easier and less time consuming when used in applications featuring a drywall ceiling. Constructed of durable, Zinc plated 20 guage steel these pre-construction brackets are suitable for use in plenum spaces. They attach to the ceiling joists ahead of the sheet rock installation and define where the loudspeaker through hole must be cut by the ceiling contractor. Part # 061347 is sold singly, packaged in individual cartons.

This optional mud ring kit offers increased mounting flexibility for our IC-400-T and IC-525-T 70-volt in-ceiling speakers when used in drywall applications. These pre-construction brackets are made of durable, powder-coated 20 guage steel, making them suitable for plenum spaces. They attach to the ceiling joists prior to Sheetrock® installation and simplify speaker placement.

THX®-Approved, the KPT-684 is a high output, bass-reflex subwoofer featuring advanced low-frequency driver design. The system utilizes two 18-inch drivers that gain their high efficiency through the use of large, geometrically optimized magnet structures and lightweight cones. The enclosure is constructed of one-inch, void-free birch plywood and features internal cross braces at all cabinet joints.

With a depth of only 11 inches, the new KPT-418 cinema subwoofer is even more compact than the KPT-884. Serving as a replacement for the KPT-484, this high-output, bass-reflex subwoofer system delivers true bottom-end performance along with high power handling capability and high efficiency. It can be used as the main subwoofer system in a small auditorium or as the subwoofer for surrounds in small- to medium-sized auditoriums.

THX®-Certified, this two-way cinema surround loudspeaker system offers high efficiency, controlled coverage, and standard SMPTE/ISO 2696 X-curve de-emphasis. It features a single high-output, eight-inch woofer and a high-frequency compression driver coupled to a 100° x 100° Tractrix® horn. The shallow enclosure angles the drivers downward at a 15° angle and is pre-drilled for industry-standard mounting brackets. The system also incorporates a high-frequency protection circuit to safeguard the tweeter.

The KPT-1201 is a THX®-certified cinema surround speaker system that delivers extended bass response, controlled coverage, and standard SMPTE/ISO 2696 X-curve de-emphasis from an enclosure designed not to appear bulky. Its 12-inch woofer and 1.75-inch titanium high-frequency compression driver coupled to a 100 x 100 Tractrix Horn accurately reproduce the enormous dynamic range demanded by digital sound formats. A protection circuit guards the tweeter from potentially damaging signal levels. The enclosure angles the drivers downward at a 15 angle and is pre-drilled for industry standard mounting brackets.

Continuing to advance Klipsch's technological leadership position, this patented Virtual Boundary Array Technology (VBAT) loudspeaker reduces the required number of surround speakers typically used in today's conventional surround channel array by 50%.

This exciting new technology uses a pair of our patented skewed horns in a side by side configuration that provides coverage in excess of 140 degrees in the horizontal. The result is consistent coverage over a much wider area than was previously possible with a single horn. These new horns also have a tighter 60-degree vertical pattern for greater distance throw—better suited to today's wider auditoriums.

The large voice coil 8-inch woofer and pair of 1-inch titanium diaphragm compression drivers give the KPT-8-VB very high power handling. When combined with 98dB sensitivity, the result is truly effortless reproduction of the tremendous dynamic range present in today's digital sound tracks.

The system's durable enclosure features an angled 15-degree down-firing front baffle and rear panel equipped with threaded inserts to accommodate industry-standard brackets. This facilitates quick, simple and secure installation.The top mounted two point barrier strip provides easy access for hookup after installation.

The KPT-8-VB incorporates the standard SMPTE/ISO 2696 X-curve into its response and is capable of a solid 50Hz in-room response, further enhancing the realism in the digitally mastered effects channels.

An array of KPT-8-VB's have an uncanny ability to localize and track directional effects and provide seamless envelopment, setting a new standard for the suspension of disbelief in the movie going experience.

Continuing to advance Klipsch's technological leadership position, this patented Virtual Boundary Array Technology (VBAT) loudspeaker reduces the required number of surround speakers typically used in today's conventional surround channel array by 50%.

This exciting new technology uses a pair of our patented skewed horns in a side by side configuration that provides coverage in excess of 140 degrees in the horizontal. The result is consistent coverage over a much wider area than was previously possible with a single horn. These new horns also have a tighter 60-degree vertical pattern for greater distance throw—better suited to today's wider auditoriums.

The large voice coil 12-inch woofer and pair of 1.75-inch titanium diaphragm compression drivers give the KPT-12-VB truly prodigious power handling. When combined with 100dB sensitivity, the result is truly effortless reproduction of the tremendous dynamic range present in today's digital sound tracks.

The system's durable enclosure features an angled 15-degree down-firing front baffle and rear panel equipped with threaded inserts to accommodate industry-standard brackets. This facilitates quick, simple and secure installation. The top mounted two point barrier strip provides easy access for hookup after installation.

The KPT-12-VB incorporates the standard SMPTE/ISO 2696 X-curve into its response and is capable of a solid 40Hz in-room response, further enhancing the realism in the digitally mastered effects channels.

An array of KPT-12-VB's have an uncanny ability to localize and track directional effects and provide seamless envelopment, setting a new standard for the suspension of disbelief in the movie going experience.

Engineered to save space, the new KPT-325 is only 12-inches in depth. The system features the KPT-315-LF single, 15-inch woofer enclosure coupled with the KPT-904-HF Tractrix® Horn. Amazingly, this compact combination delivers the same frequency response as the KPT-904 system. The KPT-325 is available with or without a passive crossover.

An advanced technology Tractrix® Horn, the KPT-904-HF, is mated to the KDE-75-8P titanium compression driver and, together with the dual, 15-inch, low frequency cabinet, delivers sensational performance and accurate coverage control, all at a remarkable price. The KPT-904 is available with or without a passive crossover.

Embracing the concept of a three-way, direct radiated bass system in a behind-the-screen application, the KPT-535-T utilizes the KPT-904/940-LF double, 15-inch, low frequency system. Reproducing the critical dialogue range is the KPT-402 mid-bass Tractrix® Horn coupled to the Klipsch K-1133 two-inch-exit titanium compression driver. The high frequencies are easily handled by the Grand-HF-T Tractrix Horn. The KPT-535-N is a bi-amp version of this way system, with a passive crossover between the mid and high frequency horns.

The first and only fully horn-loaded, THX®-Approved four-way cinema system, the KPT-MCM-4-T Grand affords the ultimate in audio performance for larger exhibition spaces and, in particular, those grand auditioriums fitted with digital sound reproduction equipment.

The low frequency punch is provided by a KPT-MWM dual, 15-inch, high efficiency, horn-loaded woofer enclosure, aided by a separate, single, 12-inch, Tractrix® Horn-loaded mid-bass device, the KPT-XII. High frequencies are effortlessly reproduced by the KPT-402-MF Tractrix® Horn and Klipsch K-1133 two-inch exit titanium compression driver. The high output, extended high frequency horn module, the KPT-Grand-HF-T, provides extra sizzle in more majestic-sized theaters. The MCM Grand is ultra-efficient and, in correct multi-channel configuration, can yield absolutely even sound coverage to every seat in the house.

The THX®-Certified KPT-942-T is the newest high-performance two-way screen and stage loudspeaker system well suited to medium-sized auditoriums. Based on the proven KPT-904-LF dual 15-inch bass unit, it delivers powerful bass from a cabinet just 24 inches deep. For high output combined with excellent coverage, the system uses a KPT-402-HF Tractrix® Horn with a K-1132 two-inch exit titanium compression driver to reproduce middle and high frequencies.

The new THX®-Certified KPT-942-4-T two-way screen and stage loudspeaker system is based on our new KPT-415-LF quad 15-inch bass unit, providing enhanced bass output while retaining the 24-inch depth of our smaller systems. Higher frequencies are handled by a KPT-402-HF Tractrix® Horn with a K-1132 two-inch exit titanium compression driver. The KPT-942-4's high efficiency, very high output, and excellent coverage characteristics make it an outstanding, cost-effective solution for medium and large auditoriums.

The KPT-MCM-3 Grand is a three-way screen and stage loudspeaker system designed for spectacular sound in large venues. Its high efficiency and output capability are particularly well suited to auditoriums with digital sound systems. Key to the speaker's performance is its KPT-MWM dual 15-inch horn-loaded woofer enclosure, assisted by a separate KPT-XII 12-inch Tractrix® Horn-loaded mid-bass module. Perfectly balancing this low frequency combination is a KPT-402-HF Tractrix® Horn mated to our K-1132 two-inch exit titanium compression driver.

Less than 20-inches in depth, it is also one of the smallest speakers in its performance category. Based on the proven KPT-904-LF dual 15-inch bass unit, the KPT-435-N delivers powerful bass from a shallow cabinet that is just 17.75 inches deep. In order to the reproduce critical dialogue range, this system also features the new KPT-335 HF/MF, which consists of a K-510 Tractrix® Horn, two-inch throated compression driver and the K-703 horn with a 1.75-inch titanium diaphragm. It is perfect for exhibitors who want to utilize a fully passive or bi-amp three-way system in their auditoriums.

Less than 24 inches in depth, the KPT-745-Q system is perfect for larger theater venues with limited space behind the screen. The low-frequency punch is provided by the high efficiency KPT-415-LF quad 15-inch bass unit, aided by a separate, single 12-inch, Tractrix Horn-loaded mid-bass device, the KPT-XII-MB.The KPT-402-MF Tractrix Horn and K-1133 two-inch exit titanium compression driver effortlessly reproduce the system's mid frequencies.

For the added kick that's required by grandiose locations, the KPT-Grand-HF-T extended high-frequency horn module easily handles the system's smooth treble reproduction. This powerful system is also available with a mid/high passive crossover for a tri-amp configuration and referred to as the KPT-745-N.

A 12-inch three-way, cinema surround loudspeaker system, the KPT-250 offers high power handling, extreme efficiency, extended bass response and exceptional coverage control. For the ultimate in digital sound reproduction, the system features Tractrix Horn technology, a 15° down-firing angle, internal metal safety reinforcement brackets, a 3/4-inch void-free plywood enclosure pre-drilled for industry standard mounting brackets and a high-frequency protection circuit.

Klipsch Designed the four-way KPT-445-N to deliver the increased dynamics and detail found on the digital soundtracks of today’s latest films for small to medium sized auditoriums. The KPT-445-N screen channel system is designed to be tri-amplified with an included passive network to handle the HF to UHF crossover function. Utilizing the KPT-904-LF double 15” low-frequency system as a solid foundation, the KPT-402-MF Tractrix® horn and K-1133 two-inch exit titanium diaphragm compression driver effortlessly reproduces the critical mid-band dialogue range. The KPT-445-N high frequency section consists of the proven KPT-904-HF Tractrix horn and 3” titanium diaphragm compression driver seamlessly joined by a custom passive network with the K-703 horn and a 1.75” titanium diaphragm compression driver to deliver fine detail to every seat in the house. The combination of the K-510 high frequency and K-703 Ultra-High frequency Tractrix horns comprise the KPT-445-UHF/HF-N module.